Key Feature
- Dual PFC QuantaPulse™ Regulated SMPS
- Max. Output: 270V/70A peak
- Dedicated design for powerful subwoofers
- Industry standard Neutrik® MPS and Speakon® connectors
- 32/38/44dB selectable Gain
- Hi Efficiency, Heavy Duty Audio Power section for extreme use
- Removable front panel dust filters
- Efficient front to back cooling
|
|
Description
The ENNE MPS2-6000D amplifier has been designed with the aim of offering the proper and more reliable amp to users of very big subwoofers with no concessions. Its output performances (270V/70A) is more than needed to push your subs as far as their maximum limits accept.
These 2 channels device is based on the field proven Quanta PulseTM Technology with an oversized dual high capacity regulated power supply with PFC to deliver their full performances independently of mains status, and an also oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution.
In short, with MPS2-6000D amplifiers you make sure that you will get the maximum output performances to your more powerful subwoofers without compromises!
|
|
Specifications:
| Output Power (1kHz, 1.0% THD+N) |
: |
|
| @ 8Ω |
: |
3000W x 4 |
| @ 4Ω |
: |
6000W x 2 |
| Bridge @ 8W |
: |
|
| Frequency Response (± 0.25dB) |
: |
20Hz - 20KHz |
| Phase Response (@ 1W 20Hz - 20KHz) |
: |
± 15deg |
| Total Harmonic Distortion (20Hz - 20KHz) |
: |
< 0.05% |
| Intermodulation Distortion |
: |
< 0.05% |
| Damping Factor (20 - 500Hz @ 8Ω) |
: |
> 500 |
| Crosstalk (20Hz - 1KHz) |
: |
> 80dB |
| Voltage Gain |
: |
32 / 38 / 44dB |
| Sensitivity (26 / 32 / 38dB Gain) |
: |
3.9 / 1.9 / 1V |
| Signal to Noise Ratio (20Hz - 1KHz) |
: |
116dB |
| Required AC Mains |
: |
|
| Power on Idling (@ 230V) |
: |
0.5A |
| 1/8 Rated Power @ 4Ω (@ 230 min.Z) |
: |
14A |
| Operating Voltage (50Hz - 60Hz) |
: |
90V - 265V AC |
| Dimmensions (H x W x D) |
: |
483 x 88.9 x 460mm |
| Weight |
: |
12Kg |
| Protections |
: |
Soft-start, Turn-on Turn-off transients, Over-heating,
DC, RF, Short-circuit, Open or mismatched loads, ICL™,
PMS™, SSP™ and FCM™
|
|
|
Key Feature
- Extra-large IPS display, capacitive touch panel user interface
- 64 bit double-precision 96KHz DSP process
- High performance 96KHz/24 bits AD/DA converters
- Powerful and fast response cooling system
- Available versions with Dante ™ Networking (AES67) and AES3 Digital inputs
- Two ports Ethernet switch for daisy chain connection
- USB port for firmware update and DSP control
- High voltage output for high headroom sound
- Similar power per channel in any impedance
- Advanced power management to squeeze until the last
- watt for your speakers
- Exceptional power sharing in asymetrical loads
|
DSP Specifications - OCS Control
Overall:
- High performance 96kHz/24 bits AD/DA converters
- 64 bit double-precision 96kHz DSP process
- 0.6ms minimum process latency time
- Custom FIR process up to 1000 taps
- Dante and AES3 input versions
Input Section (x4):
- Gain, Mute and Phase inversion
- Input Delay: Up to 114 meters (333 ms)
- Input EQ: 16 filters (Param., Shelving, LP, HP, BP, SB, AP)
Output Section (x4):
- RMS and Peak limiter per channel
- Crossover Filters: FIR and IIR (up to 48dB/oct, Butterw./LR/Bessel)
- Output Delay: 0 to 31 meters (90ms) per channel
- Output IIR EQ: 12 filters per channel (Param., Shel, LP, HP, BP, SB, AP)
- Output FIR EQ: 20 filters per channel (Parametric, Shelving, LP,HP, BP, SB, PA), or Custom. Up to 1000 taps
Communications:
- Two ports Ethernet switch for daisy chain connection
- UBS 2.0 Type B port
Miscellaneous:
- 100 Manufacturer system preset memories library
- 20 User preset memories library
- 20 User snapshot memories library
- Manufacturer/User passwords
- User control groups for virtual Equalization, Gain and Delay
- Zone management for library, and alerts information
- Smaart ® analysis software integration
|
Specifications
| Number of channels |
: |
4 |
| Total output power |
: |
10000W |
| Output power* * (All ch.’s driven/single channel) |
: |
|
| @ 8Ω |
: |
1600W x 4 / 1800W x 1 |
| @ 4Ω |
: |
2500W x 4¹ / 3000W x 1 |
| @ 2Ω |
: |
2500W x 4² / 2500W x 1² |
| Bridge @ 8 Ohms |
: |
5000W x 2¹ |
| Bridge @ 4 Ohms |
: |
5000W x 2² |
| Hi-Z 100V |
: |
2500W x 4¹ |
| Hi-Z 70V |
: |
2500W x 4² |
| Max output voltage |
: |
176V |
| Max output current |
: |
50A |
| Total Harmonic Distortion |
: |
< 0.05% |
| Voltage Gain |
: |
26dB - 44dB |
| SNR |
: |
107.5dBA |
| Required AC Mains |
: |
170V - 265V AC / 90V - 140V AC 16A |
| Dimensions (H x W x D) |
: |
89 x 483 x 320mm |
| Weight (Kg) |
: |
8.5Kg |
| Protections |
: |
Soft-start, Turn-on, Trun-off transients, Muting at turn-on,
Over-heating, DC, RF, Shortcircuit, Open or mismatched
loads, Overloaded power supply, ICL™, PMS™, and SSP™
|
|
|
|
|
* IEC filtered pink noise signal ﴾40Hz‐5kHz, 12 dB crest factor﴿. 230V AC mains.
¹ PMS can limit output to prevent excessive current draw tripping the mains breaker.
² SSP can limit output to prevent excessive heating.
|
|
|
|
